Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

NM-30DM self test

hello all

I want to perform a loopback test to check the operation of all the integrated modems (30Nos).

one way of doing it is using MMTL-3600-30 (Modem Management Technology License) to manage all the modems.

Other option is to use a Reverse telnet feature on all the modems to check the operation .

Can i get details on MMTL

Also i require sample config for performing Reverse Telnet on all the modems

Kindly Advice.

1 REPLY
Cisco Employee

Re: NM-30DM self test

You do not need a MMTL to reverse telnet to a modem..Here are some link which has step by step procedure for establishing reverse telnet session to a modem

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_c/dcrtelnt.htm

Following config you need uder the line

line 1 30

transport input all

flowcontrol hardware

autoselect ppp

modem inout

92
Views
0
Helpful
1
Replies
CreatePlease to create content