cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
344
Views
0
Helpful
1
Replies

NM-4T in Cisco 3745 is disabled deactivated

xinchao.zeng
Level 1
Level 1

The NM-4T module installed in Cisco 3745 is disabled. IOS version is 12.2(13(13)T and 12.2(11)YT2. "show diag " display:

Slot 3:

Mueslix-4T Port adapter, 4 ports

Port adapter is disabled deactivated

Port adapter insertion time unknown

EEPROM contents at hardware discovery:

Hardware revision 1.1 Board revision H0

Serial number 19752724 Part number 800-02314-02

FRU Part Number: NM-4T=

Test history 0x0 RMA number 00-00-00

EEPROM format version 1

EEPROM contents (hex):

0x20: 01 54 01 01 01 2D 67 14 50 09 0A 02 00 00 00 00

0x30: 88 00 00 00 00 08 04 00 00 05 FF FF FF FF FF FF

1 Reply 1

raymong
Level 4
Level 4

The NM-4T requires a "plus" image, be sure that you are running the correct IOS.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: