Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

No gateway set when connected via VPN

Hi, our users connect to our HQ PIX 515 using VPN client 3.6.3, authenticate to domain via IAS, and are assigned IP address eg 1.1.1.10 from pool, also assigned dns server address 1.1.1.5. Remote user can connect to all servers in HQ, which are all IP 1.1.1.x.

However, we have a 2nd site which cannot connect to I think because no route/gateway. 2nd site has IP 10.10.10.0 and try a ping request times out.

There is a VPN tunnel between both sites and users local to both sites can connect to each other.

PIX does the routing, there are no routers on the LANS. In both cases all traffic is forwarded to external address of PIX.

For a remote client if statically set the gateway address, in ipconfig, to be the gateway address of HQ lan, ie 1.1.1.254 then can ping 2nd site. I don't see how to do this dynamically or otherwise when using the VPN client

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: No gateway set when connected via VPN

Do you know where I can find like a document on this feature?

Thanks

3 REPLIES
New Member

Re: No gateway set when connected via VPN

Are you using the split-tunneling feature? If this feature is used it will not pick up the default gateway from hi firewall.

I.E. vpngroup Work split-tunnel 102

New Member

Re: No gateway set when connected via VPN

Do you know where I can find like a document on this feature?

Thanks

New Member

Re: No gateway set when connected via VPN

179
Views
15
Helpful
3
Replies