Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

No ISDN connection due to "ppp multilink" command

I've 1600 at remote and 2611 at HQ connected by ISDN.

whenever I put "ppp multilink" command at both routers, I cannot ping to each other. When I remove the "ppp multilink" - connection OK. So I cannot have 128kbps connection. the configuration is as below:

RouterA (1600 - remote)

-----------------------------------

RouterA(config)#username RouterB password cisco

RouterA(config)#isdn switch-type basic-net3

RouterA(config)#interface BRI0

RouterA(config-if)#ip address 10.100.100.14 255.255.255.252

RouterA(config-if)#encapsulation ppp

RouterA(config-if)#ppp authentication chap

RouterA(config-if)#ppp multilink

RouterA(config-if)#dialer idle-timeout 180

RouterA(config-if)#dialer map ip 10.100.100.13 21455522

RouterA(config-if)#dialer map ip 10.100.100.13 21455523

RouterA(config-if)#dialer load-threshold 125

RouterA(config-if)#dialer-group 1

RouterA(config)#dialer-list 1 protocol ip

RouterA(config)#ip route 10.0.0.0 255.0.0.0 10.100.100.13

RouterB (HQ)

-----------------------

RouterB(config)#username RouterA password cisco

RouterB (config)#isdn switch-type basic-net3

RouterB (config)#interface BRI0

RouterB (config-if)#ip address 10.100.100.13 255.255.255.252

RouterB (config-if)#encapsulation ppp

RouterB (config-if)#ppp authentication chap

RouterB (config-if)#ppp multilink

RouterB (config-if)#dialer idle-timeout 180

RouterB (config-if)#dialer map ip 10.100.100.14 2146633

RouterB (config-if)#dialer map ip 10.100.100.14 2147744

RouterB (config-if)#dialer load-threshold 125

RouterB (config-if)#dialer-group 1

RouterB (config)#dialer-list 1 protocol ip

RouterB (config)#ip route 10.1.5.0 255.255.255.0 10.100.100.14

RouterB (config)#router eigrp 10

RouterB (config-route)#network 10.0.0.0

RouterB (config-route)#redistribute static

2 REPLIES
Bronze

Re: No ISDN connection due to "ppp multilink" command

New Member

Re: No ISDN connection due to "ppp multilink" command

Thanks for a quick response. But I cannot access the website with my username and password.

Anyway, thanks man!

146
Views
0
Helpful
2
Replies
CreatePlease login to create content