Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

no logging level facility pagp in C2948G with version 7.3(1)

just upgraded the C2948G from 6.3 to 7.3(1) and found no alarms output when a server pluged in or out he C2948G.

So checked the command "set logging level facility " and no option "PAgP" or "LACP" and the document "cat4000-releasenote.7-4-1.pdf" commented:

"Prior to software release 7.1(1), Port Aggregation Control Protocol (PAgP) was available. ."

so it is a bug or it will not support the PAgP in the future release?

And how to get alarm regarding a sever joins in/out the Switch?

Thanks

1 REPLY
Cisco Employee

Re: no logging level facility pagp in C2948G with version 7.3(1)

In 7.x, PAGP Log Facility has been renamed to ethc. Try the following and you should start seeing "ETHC-5-PORTTOSTP:Port x/yjoined bridge port ..."

set logging level ethc 5 default

88
Views
0
Helpful
1
Replies
CreatePlease to create content