Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

No Sw vers for WS-X4418-GB displayed

Hello,

I have Cat 4006, 4013 SupVisCard and a WS-X4418-GB Card. SW NmpSW: 6.3(8). Command sh vers shows Sw Version only for SupVis Card, not for GB Board:

Mod Port Model Serial # Versions

--- ---- ---------- -------------------- ---------------------------------

1 2 WS-X4013 JAE054201NE Hw : 3.2

Gsp: 6.3(8.0)

Nmp: 6.3(8)

3 18 WS-X4418-GB JAE070405ZQ Hw : 1.1

>>>>>>>>>>>>>>>>>>>>>> No Sw Version !!!!!!!!!!!!!!!

Question: Normal or a faulty Interfac board. Hw-SW Matrix show min 5.4(2)

Thanks Ruedi

1 REPLY
Cisco Employee

Re: No Sw vers for WS-X4418-GB displayed

What you are seeing is normal for CAT4k catOS based switches. Here is an output from a lab switch

Console> (enable) sh ver

WS-C4006 Software, Version NmpSW: 5.5(15)

Copyright (c) 1995-2002 by Cisco Systems, Inc.

NMP S/W compiled on Jun 10 2002, 17:28:21

GSP S/W compiled on Jun 10 2002, 15:55:27

System Bootstrap Version: 5.4(1)

Hardware Version: 1.2 Model: WS-C4006 Serial #: FOX04209122

Mod Port Model Serial # Versions

--- ---- ---------- -------------------- ---------------------------------

1 2 WS-X4013 JAB04460B6C Hw : 1.2

Gsp: 5.5(15.0)

Nmp: 5.5(15)

2 34 WS-X4232-GB-RJ JAB041505MS Hw : 2.3

3 34 WS-X4232-GB-RJ JAB041505PP Hw : 2.3

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 65536K 30246K 35290K 16384K 11548K 4836K 480K 181K 299K

Uptime is 20 days, 13 hours, 1 minute

86
Views
5
Helpful
1
Replies