Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Nokia 8210 mobile phone cannot connect to the access router 3640

When user try to connect to the Cisco 3640 with MICA modem installed using the Nokia 8210 mobile phone, there is no connection. The debug of ISDN q931 show the message:

02:37:24: ISDN BR2/2: RX <- SETUP pd = 8 callref = 0x04

02:37:24: Sending Complete

02:37:24: Bearer Capability i = 0x9090236006BB

02:37:24: Channel ID i = 0x8A

02:37:24: Called Party Number i = 0xC1, 'xxxxxxxxxx'

02:37:24: ISDN BR2/2: Event: Received a call with a bad bearercap from <unknown>

on B2

I believe this is some problem on the ISDN not the MICA modem. Can anyone tell me what is bad bearercap, as I am not able to find it in the Cisco website.

1 REPLY
Anonymous
N/A

Re: Nokia 8210 mobile phone cannot connect to the access router

The bearer cap looks OK; it's for an

async call. You should ensure that

you have "isdn incoming-voice modem"

configured.

117
Views
0
Helpful
1
Replies