I'm having problem routing between the Nokia 440 and Cisco3640. The firewall has not been loaded on the Nokia yet. When I do a tcpdump on the Nokia, it looks like it is sending hellos to itself. For the Cisco3640, the hellos doesn't reach the nokia. Any ideas?
One thing to make sure is that you have physical layer established. It seems like there is a configuration issue on the Nokia if it is sending hello's to itself. If you have physical layer between the two up/up then it is definitely a configuration problem. You will need to contact Nokia to help with that config and possibly contact Cisco if after configuring the Nokia still does not work so they can help with the configuration of the 3640.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...