11-18-2002 07:13 AM - edited 03-02-2019 02:57 AM
Hi, I have an access server 2509 (1 Interface Eth0, 2 Serials).
When the router booting appears the follow message: %Error: System Flash bank 0 unknow, chip id 0xFFFF (Reserved = 0xFFFF)
%Error: system flash initialization Failed.
and i can´t do anything (upgrade IOS, booting from flash)...
Please help me!!!...
Thank you....
11-18-2002 08:08 AM
It looks like the flash simm in bank 0 is bad. If you have 16 MB of flash try moving the simm from bank 1 to bank 0 . Make sure you have code on the Simm in bank 1
11-18-2002 08:35 AM
Thank you...DAVE EILERT
How configuring to booting from Bank 1??? ... It exists???
Thank you very much....
11-18-2002 10:01 AM
If you do a 'sh flash ' & 'sh flash all' it will show you how much and where the flash simms are located .
11-18-2002 11:30 AM
The router has two bank (0 &1) correct !!!, but when put the SIMM Flash on Bank 1, but no error it appears on the Hyperterminal...but... the output command show version: no flash appears.
Thank you again...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: