non cisco devices in lms topology map

[ramiro_ortiz]

Is there any way of adding a non-cisco device in order it to appear in the topology map?

I don´t want to manage it from the lms, just to be capable of distingishing the state of this device, server, etc (for example with a ICMP ping or whatever).

I´ve been looking for a function for adding a new device by hand but without success.

Any help would be appreciated.

[rmushtaq]

No, CM uses CDP for discovery along with SNMP, so non-cisco devices will not get discovered.

[rolalo]

but, will i be able to add the device manually?

device for example is windows server with snmp agent installed.

[rmushtaq]

Cannot add a device manually in Campus Manager, can do it RME and then sync it with CM.

[Hernan Moya]

Hi Rizwan Mushtaq,

I need to know if there is any problem to add devices to CiscoWorks inventory when I have a lot of remote offices and all of this are over MPLS networks. I can´t mek changes to SP network. I add devices manually in RME but doesn't appers in the Campus Manager inventory.Can you help me please? Can you send me your email?

Many Thanks.

Hernan Moya.