Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

non cisco devices in lms topology map

Is there any way of adding a non-cisco device in order it to appear in the topology map?

I don´t want to manage it from the lms, just to be capable of distingishing the state of this device, server, etc (for example with a ICMP ping or whatever).

I´ve been looking for a function for adding a new device by hand but without success.

Any help would be appreciated.

4 REPLIES
Blue

Re: non cisco devices in lms topology map

No, CM uses CDP for discovery along with SNMP, so non-cisco devices will not get discovered.

New Member

Re: non cisco devices in lms topology map

but, will i be able to add the device manually?

device for example is windows server with snmp agent installed.

Blue

Re: non cisco devices in lms topology map

Cannot add a device manually in Campus Manager, can do it RME and then sync it with CM.

New Member

Re: non cisco devices in lms topology map

Hi Rizwan Mushtaq,

I need to know if there is any problem to add devices to CiscoWorks inventory when I have a lot of remote offices and all of this are over MPLS networks. I can´t mek changes to SP network. I add devices manually in RME but doesn't appers in the Campus Manager inventory.Can you help me please? Can you send me your email?

Many Thanks.

Hernan Moya.

133
Views
0
Helpful
4
Replies
CreatePlease login to create content