Novell netware 6.0 NDS ( trees ) not showing durning Login !!!
My client was using netware 6.0 OS with a flat addressing scheme 172.20.x.y using layer 2 switches and hubs. We had now implemented a L3 core switch cisco 4506 with vlans. After creation of vlans, the users from different vlans can ping all the netware servers in the server vlan but cannot access the servers using the novell client application,ie the tree structure does not display.
I did enable IPX routing in the global mode but by default the netware clients 6.0 do not use ipx.
Re: Novell netware 6.0 NDS ( trees ) not showing durning Login !
really wasn't thinking, enabling multicast will work, but so will setting the designated agent address, you need to load the da nlm on a server, then point your clients at the da, this can be done thru dchp, then the novell clients will use unicast instead of multicast to find the nds info from the da. or enable multicast and the client will find the da via multicast
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...