04-05-2004 10:06 AM - edited 03-02-2019 02:48 PM
I am receiving the following error on a 7206VXR with a NPE-300 installed:
ROM: DIMM 0 is not the factory fixed/supported 32MB DIMM!
ROM: Please replace DIMM 0 with the original 32MB DIMM.
Can I just order a new MEM-SD-NPE-32MB for this slot, or does it take special memory? Thanks for your help.
Solved! Go to Solution.
04-09-2004 12:20 PM
The error you are seeing is because the dimm in slot 0 has been replaced. If the original dimm is not in that slot and if you still have it then place it back in that slot. If you do not have it then the NPE will have to be replaced.
04-09-2004 12:20 PM
The error you are seeing is because the dimm in slot 0 has been replaced. If the original dimm is not in that slot and if you still have it then place it back in that slot. If you do not have it then the NPE will have to be replaced.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide