After you select and configure a login module, all authentication transactions are performed by that source. The CW2K Server still determines the user roles; therefore, all users must be in the local database of user ID's and passwords. Users who are authenticated by an alternative service and who are not in the local database are assigned to the same role as the guest user (by default, the Help Desk role). To assign a user to a different role, such as System Admin role, you must configure the user locally. Such users must have the same user ID locally as they have in the alternative authentication source. As for the domain groups, you can try it to see if tt works.
No. The external CW2K authentication has nothing to do with local CW2K login authentication. After you select and configure a login module, all authentication transactions are performed by that source.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...