11-24-2003 10:50 AM - edited 03-02-2019 11:56 AM
Greetings,
I have a number of WAN routers spread across the country. I've set each via SNTP to sync time to an external stratum 2 server. I noticed that the time syncs to the eastern time of the server, so I set timezone and GMT offset to correct for local time. No problem. But, any log entries get timestamped with the current local time plus the offset - i.e., if the time is 10:00:00 it stamps 18:00:00.
What am I doing wrong?
Thanks
Solved! Go to Solution.
11-24-2003 11:06 AM
You might want to look into these commands:
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
11-24-2003 11:06 AM
You might want to look into these commands:
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
11-25-2003 12:44 PM
Worked like a charm.
Thanks
01-29-2004 10:03 AM
Try this:
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
Good luck.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide