Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NTP with Windows Time Server

Hi,

We have some routers which are not able to sync with the Windows NTP server.

Some of them are able to, wondering if its to do with some ios issue or what.

When I do a debug I get this information from NTP.

#
Apr  6 18:04:23.011: NTP message sent to 10.240.5.77, from interface 'GigabitEthernet0/1' (10.240.253.3).
Apr  6 18:04:23.011: NTP message received from 10.240.5.77 on interface 'GigabitEthernet0/1' (10.240.253.3).
Apr  6 18:04:23.011: NTP Core(DEBUG): ntp_receive: message received
Apr  6 18:04:23.011: NTP Core(DEBUG): ntp_receive: peer is 0x00000000, next action is 4.
Apr  6 18:04:23.011: NTP Core(NOTICE): ntp_receive: dropping message: manycast peer not enabled.
Apr  6 18:05:27.011: NTP message sent to 10.240.5.77, from interface 'GigabitEthernet0/1' (10.240.253.3).
Apr  6 18:05:27.011: NTP message received from 10.240.5.77 on interface 'GigabitEthernet0/1' (10.240.253.3).
Apr  6 18:05:27.011: NTP Core(DEBUG): ntp_receive: message received
Apr  6 18:05:27.011: NTP Core(DEBUG): ntp_receive: peer is 0x00000000, next action is 4.
Apr  6 18:05:27.011: NTP Core(NOTICE): ntp_receive: dropping message: manycast peer not enabled.
Apr  6 18:06:32.011: NTP message sent to 10.240.5.77, from interface 'GigabitEthernet0/1' (10.240.253.3).
Apr  6 18:06:32.011: NTP message received from 10.240.5.77 on interface 'GigabitEthernet0/1' (10.240.253.3).
Apr  6 18:06:32.011: NTP Core(DEBUG): ntp_receive: message received
Apr  6 18:06:32.011: NTP Core(DEBUG): ntp_receive: peer is 0x00000000, next action is 4.
Apr  6 18:06:32.011: NTP Core(NOTICE): ntp_receive: dropping message: manycast peer not enabled.
Apr  6 18:07:35.011: NTP message sent to 10.240.5.77, from interface 'GigabitEthernet0/1' (10.240.253.3).
Apr  6 18:07:35.011: NTP message received from 10.240.5.77 on interface 'GigabitEthernet0/1' (10.240.253.3).
Apr  6 18:07:35.011: NTP Core(DEBUG): ntp_receive: message received
Apr  6 18:07:35.011: NTP Core(DEBUG): ntp_receive: peer is 0x00000000, next action is 4.
Apr  6 18:07:35.011: NTP Core(NOTICE): ntp_receive: dropping message: manycast peer not enabled.
Kindly advise,
Rgds,

Tauseef
6 REPLIES
Purple

Re: NTP with Windows Time Server

Hi,

Can you post output of sh run | s ntp for these routers and compare with one that is working.

Regards.

Alain.

Don't forget to rate helpful posts.
New Member

Re: NTP with Windows Time Server

Hi,

Show compare, is like the basic stuff. All done, then is when I posted this query. In fact, the router which gave this debug, is working fine when I configure it to another router in the network as an NTP server. But fails and gives these errors with the Windows NTP.

Hall of Fame Super Gold

Re: NTP with Windows Time Server

Cisco Employee

Re: NTP with Windows Time Server

Starting with 12.4(20)T IOS will default to NTPv4.  If your server only supports v3 you will get the error you see in the debugs.   You can move to a server that supports v4, or manually change the  router to use v3, for example:

"ntp server 10.10.10.10 version 3". 

Let us know if that works.  If it doesn't, a show version and show run would be helpful.
New Member

Re: NTP with Windows Time Server

Hi  Preston,

Seems like the most logical answer that I have observed till date.

Have to try it once I work on this in the coming week at the client side.

Will keep you posted on this update Preston.

Rgds,


Tauseef

New Member

Re: NTP with Windows Time Server

Far away from what i was looking for. I guess its not clear on what I asked. Its okay, thanks for your input

any ways.

2467
Views
0
Helpful
6
Replies