Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

OS has been deleted in AP350

Dear Sirs

I have Cisco Access point 350 with IOS 12.2 JA, I want to upgrade it to 12.8 IOS version. I have download the c350-k9w7-tar.123-7.JA3.tar file from cisco web site and copyed it to flash from TFTP so I thouth that I have to remove the old OS and let the new one extracted, so I have delete the OS file in flash witch is c350-k9w7-tar.122-13.JA1, and now I am not able to boot the AP.

Please help me how I can install the new OS version 12.8 and

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: OS has been deleted in AP350

Step 7 When the display becomes full, the CLI pauses and displays --MORE--. Press the spacebar to continue.

extracting info (229 bytes)

c350-k9w7-mx.122-13.JA1/ (directory) 0 (bytes)

c350-k9w7-mx.122-13.JA1/html/ (directory) 0 (bytes)

c350-k9w7-mx.122-13.JA1/html/level1/ (directory) 0 (bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/appsui.js (558 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/back.htm (205 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/cookies.js (5027 bytes).

extracting c350-k9w7-mx.122-13.JA1/html/level1/forms.js (15704 bytes)...

extracting c350-k9w7-mx.122-13.JA1/html/level1/sitewide.js (14621 bytes)...

extracting c350-k9w7-mx.122-13.JA1/html/level1/config.js (2554 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/stylesheet.css (3215 bytes)

c350-k9w7-mx.122-13.JA1/html/level1/images/ (directory) 0 (bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/ap_title_appname.gif (1422 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_1st.gif (1171 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_cbottom.gif (318 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_current.gif (348 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_last.gif (386 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_last_filler.gif (327

bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_last_flat.gif (318

bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_nth.gif (1177 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_leftnav_dkgreen.gif (869 bytes)

-- MORE --

--------------------------------------------------------------------------------

Note If you do not press the spacebar to continue, the process eventually times out and the access point stops inflating the image.

--------------------------------------------------------------------------------

Step 8 Enter the set BOOT command to designate the new image as the image that the access point uses when it reboots. The access point creates a directory for the image that has the same name as the image, and you must include the directory in the command. Your entry might look like this example:

ap: set BOOT flash:/c350-k9w7-mx.122-13.JA1/c350-k9w7-mx.122-13.JA1

Step 9 Enter the set command to check your bootloader entries.

ap: set

BOOT=flash:/c350-k9w7-mx.122-13.JA1/c350-k9w7-mx.122-13.JA1

DEFAULT_ROUTER=192.168.133.1

IP_ADDR=192.168.133.160

NETMASK=255.255.255.0

Step 10 Enter the boot command to reboot the access point. When the access point reboots, it loads the new image.

ap: boot

regards

Neo

15 REPLIES
New Member

Re: OS has been deleted in AP350

Hi ,

There must be some output or blank screen on hypertrm when u connect it via console and boot the AP350 .

regards

Neo

New Member

Re: OS has been deleted in AP350

hi Neo,

Thanks for reply yes the following is the output on the term.

flashfs[0]: 141 files, 6 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 7612416

flashfs[0]: Bytes used: 5089792

flashfs[0]: Bytes available: 2522624

flashfs[0]: flashfs fsck took 0 seconds.

Reading cookie from flash parameter block...done.

Base ethernet MAC Address: 00:40:96:57:ee:54

The system is unable to boot automatically because there

are no bootable files to boot.

C350 Boot Loader (C350-BOOT-M) Version 12.2(13)JA, EARLY DEPLOYMENT RELEASE SOFT

WARE (fc1)

TAC Support: http://www.cisco.com/tac

Compiled Tue 28-Oct-03 10:46 by pwade

ap:

thanks

New Member

Re: OS has been deleted in AP350

New Member

Re: OS has been deleted in AP350

Dear

the link is down, and it's require additional access..

We Apologize

The Page You Have Requested Is Not Available

The page you are trying to access may have been moved to a different location or removed because the information is no longer valid. If you typed the address, please verify that the spelling is correct.

New Member

Re: OS has been deleted in AP350

Hi ,

I know that thats why i recomended to use Console port....

regards

Neo

:)

New Member

Re: OS has been deleted in AP350

Dear neo

:( please I need to solve this problem urgent,

there is no consol port, I am login to AP by serial port by Hypertem.

Please Help

New Member

Re: OS has been deleted in AP350

Hi,

The link in my earlier post has two methods one using web browser and second using CLI mode its heading is "Using the CLI on the Serial Port "

hopw it works this time

regards

Neo

New Member

Re: OS has been deleted in AP350

man my AP is not configured and I can't access this link for sure because there is no OS to boot.

New Member

Re: OS has been deleted in AP350

i was just wondering how are you able to access Cisco NetPro website if your link is down .Anyways i have just copied from the site

Using the CLI on the Serial Port

Follow the steps below to reload the access point image using CLI on the serial port. When the access point begins to boot, you interrupt the boot process and use boot loader commands to load an image from a TFTP server to replace the image in your access point

--------------------------------------------------------------------------------

Note Your access point configuration is not changed when you use the CLI to reload the image file.

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Step 1 Open the CLI using a Telnet session or a connection to the access point console port.

Step 2 Reboot the access point by removing and reapplying power.

Step 3 Let the access point boot until it begins to inflate the image. When you see these lines on the CLI, press Esc:

Loading "flash:/c350-k9w7-mx.v122_13_ja.20031010/c350-k9w7-mx.v122_13_ja.20031010"

...###########################################################################

################################################################################

################################################################################

####################

Step 4 When the ap: command prompt appears, enter the set command to assign an IP address, subnet mask, and default gateway to the access point.

--------------------------------------------------------------------------------

Note You must use upper-case characters when you enter the IP-ADDR, NETMASK, and DEFAULT_ROUTER options with the set command.

--------------------------------------------------------------------------------

Your entries might look like this example:

ap: set IP_ADDR 192.168.133.160

ap: set NETMASK 255.255.255.0

ap: set DEFAULT_ROUTER 192.168.133.1

Step 5 Enter the tftp_init command to prepare the access point for TFTP.

ap: tftp_init

Step 6 Enter the tar command to load and inflate the new image from your TFTP server. The command must include this information:

•The -xtract option, which inflates the image when it is loaded

•The IP address of your TFTP server

•The directory on the TFTP server that contains the image

•The name of the image

•The destination for the image (the access point Flash)

Your entry might look like this example:

ap: tar -xtract tftp://192.168.130.222/images/c350-k9w7-tar.122-13.JA1 flash:

New Member

Re: OS has been deleted in AP350

Step 7 When the display becomes full, the CLI pauses and displays --MORE--. Press the spacebar to continue.

extracting info (229 bytes)

c350-k9w7-mx.122-13.JA1/ (directory) 0 (bytes)

c350-k9w7-mx.122-13.JA1/html/ (directory) 0 (bytes)

c350-k9w7-mx.122-13.JA1/html/level1/ (directory) 0 (bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/appsui.js (558 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/back.htm (205 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/cookies.js (5027 bytes).

extracting c350-k9w7-mx.122-13.JA1/html/level1/forms.js (15704 bytes)...

extracting c350-k9w7-mx.122-13.JA1/html/level1/sitewide.js (14621 bytes)...

extracting c350-k9w7-mx.122-13.JA1/html/level1/config.js (2554 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/stylesheet.css (3215 bytes)

c350-k9w7-mx.122-13.JA1/html/level1/images/ (directory) 0 (bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/ap_title_appname.gif (1422 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_1st.gif (1171 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_cbottom.gif (318 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_current.gif (348 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_last.gif (386 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_last_filler.gif (327

bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_last_flat.gif (318

bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_nth.gif (1177 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_leftnav_dkgreen.gif (869 bytes)

-- MORE --

--------------------------------------------------------------------------------

Note If you do not press the spacebar to continue, the process eventually times out and the access point stops inflating the image.

--------------------------------------------------------------------------------

Step 8 Enter the set BOOT command to designate the new image as the image that the access point uses when it reboots. The access point creates a directory for the image that has the same name as the image, and you must include the directory in the command. Your entry might look like this example:

ap: set BOOT flash:/c350-k9w7-mx.122-13.JA1/c350-k9w7-mx.122-13.JA1

Step 9 Enter the set command to check your bootloader entries.

ap: set

BOOT=flash:/c350-k9w7-mx.122-13.JA1/c350-k9w7-mx.122-13.JA1

DEFAULT_ROUTER=192.168.133.1

IP_ADDR=192.168.133.160

NETMASK=255.255.255.0

Step 10 Enter the boot command to reboot the access point. When the access point reboots, it loads the new image.

ap: boot

regards

Neo

New Member

Re: OS has been deleted in AP350

Dear Neo;

Thank you for your support,

the problem I don't have the JAR1 file because I have download this file name from cisco web site"c350-k9w7-tar.123-7.JA3.tar" and it's not able to do the previous instruction you have mentioned

also I have extract this file through winrar and inside I find one folder contain JAR1 file but also I faced the same problem witch saying permision denied !! and some time getting error saying connection time out but my TFTP is working fine for sure.

New Member

Re: OS has been deleted in AP350

UP

Re: OS has been deleted in AP350

Hi Friend,

As you updated in your previous post there is a folder inside. With inside you mean inside the flash?

If yes I don't think so you can extract it when it is inside the flash. Its better you can delete that folder.

Can you download the file again from cicso website and do not extract it and follow the same procedure what NEO had updated!!

Regards,

Ankur

New Member

Re: OS has been deleted in AP350

Dear Ankur,

how are you man, thanks for ur post, I mean inside the folder... I have download the .tar file from cisco site and when I tryed to uploade it to AP as the neo instract to me, I was not able to do that, so I have extract this file in my pc using winrar so inside this folder of extraction I find one .JAR1 file (as shown in Neo instruction) and tryed to uploaded it to AP but I can't to upload it also.

New Member

Re: OS has been deleted in AP350

Thanks Neo,

The problem was in

set IP_ADDR Command,

it sgould be upper case.

Thanks again

125
Views
0
Helpful
15
Replies