The OSPF Demand Circuit is Ok for suppressing the Hellos of the OSPF, but it brings up the DDR link with any single change in the OSPF database even if this change is initiated from another Router in the OSPF domain.
What I need is a way to bring up the DDR when there is a change in the OSPF database provided that the Router who initiates this change is the Router that configured for DDR backup.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...