09-22-2003 08:58 PM - edited 03-02-2019 10:31 AM
Can anybody tell me for How many P-to-P (E1's) can load balance at a time in OSPF as Routing Protocol.
regards
arief
09-22-2003 10:18 PM
The limit was 6 until the release of IOS 12.3.2T. Starting with this release of IOS the limit is 16. See the following url:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/
Cheers
09-23-2003 12:10 AM
Hi..
Iam having Flex Wan Module(8port)embedded in 6509 (MSFC's) Having version of 12.1(8a)es in site A and Site B is connected with (2) 7513's , Totally Iam having 8 E1's connected (4 in one 7513 and another 4 in 2nd 7513).But Iam getting only 4 links been load balanced. If I want to have all the 8 to be balanaced.What is the solution and which rtelease can support this...
regards
arief
09-23-2003 12:22 AM
Hi,
You can use the "maximum-paths x" under the router command mode to adjust the number of maximum parallel paths, which is 4 by default, but can be up to 6.
Hope I helped
09-24-2003 02:23 AM
Hi..
Thanks , yes it helped , now i configured for 8 and it works fine...
regards
arief
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: