OSPF Load Balancing

[karief]

Can anybody tell me for How many P-to-P (E1's) can load balance at a time in OSPF as Routing Protocol.

regards

arief

[liviu.gheorghe]

The limit was 6 until the release of IOS 12.3.2T. Starting with this release of IOS the limit is 16. See the following url:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/

Cheers

[karief]

Hi..

Iam having Flex Wan Module(8port)embedded in 6509 (MSFC's) Having version of 12.1(8a)es in site A and Site B is connected with (2) 7513's , Totally Iam having 8 E1's connected (4 in one 7513 and another 4 in 2nd 7513).But Iam getting only 4 links been load balanced. If I want to have all the 8 to be balanaced.What is the solution and which rtelease can support this...

regards

arief

[jawad1979]

Hi,

You can use the "maximum-paths x" under the router command mode to adjust the number of maximum parallel paths, which is 4 by default, but can be up to 6.

Hope I helped

[karief]

Hi..

Thanks , yes it helped , now i configured for 8 and it works fine...

regards

arief