I have some branch offices connected to central office.I am using OSPF as dynamic protocol. I am gonna to make branch offices working like stub or totally-stub for OSPF cloud. And also i want to make all this connections over IPsec. Has anybody got any configuration example or technotes from Cisco ?
I checked Cisco VPN (DMVPN) technology.It seems like you have one interface on router acting with several branch routers. In my case i have all branch routers connected through E1(time-slots).So i have different virtual serial interfaces for each branch office.
I thought about GRE over IPsec, normal Static Crypto-maps. What can you suggest?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...