Do OSPF E1 type routes (which are statically redistributed into the process) take priority E2 type routes even though the metric for which the E2 route is learned is better (less than) the metric for the E1 type route.
Example below displayed on Core router A:
When remote router B (which is seen via a LAN) knows the static by a type 1:
O E1 188.8.131.52/24
[110/2644] via 192.168.10.10, 00:00:16, FastEthernet2/0.15
When remote router A (which is WAN attached) knows the static by a type 2, after the type 1 is removed from remote router B:
O E2 184.108.40.206/24 [110/20] via 192.168.99.122, 00:00:17, ATM4/0.485
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...