OSPF Route - Not In the routing table - reg

[k.sadagopan]

The SHOW IP OSPF DATABASE output reflects the specified network, whereas the same is not getting installed in the routing table. Please throw some light on this.

[thisisshanky]

Hello,

Hope this link helps you to find an answer for the exact problem....

http://www.cisco.com/warp/public/104/26.html

[deilert]

can you show the output of sh ip o dat & sh ip route . Also what kind of router is it ?

[k.sadagopan]

Router#sh ip ospf data | incl 203.195.211.12

203.195.211.12 203.195.198.137 838 0x80000004 0xF601 0

Router#sh ip route 203.195.211.12

Routing entry for 203.195.211.0/24

Known via "static", distance 254, metric 0 (connected)

Routing Descriptor Blocks:

* directly connected, via Null0

Route metric is 0, traffic share count is 1

[deilert]

sh a sh ip o dat external 203.195.211.12

the route is in your routing table it is forwarding it to null 0

is there a static route to null 0

what does a sh ip route staic show ?