I want to know if ospf can handle about 620 routes+ 630 routing table, reason being we have 620 remote sites all dialing to 2x3660 routers (hunt group). As the Mitel (remote isdn router) don't have ospf capability We had to define static routes for all remote subnet's behind the each Mitel isdn box's in both 3660 routers so that which ever router excepts incoming call have static route for remote subnet's behind that isdn device (Mitel).
Cisco recommend that in OSPF less than 100 routers in 1 area, less than 700 routers in the whole network. In this point you can deploy OSPF in you network. But you must consider the routing protocol packet (e.g. hello packet) in your network. that might make your isdn line dial to another site for exchanging routing protocol. Considering use snapshot routing.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.