12-24-2003 01:18 AM - edited 03-02-2019 12:32 PM
Dear all
i have a OSPF with multi zones my problem is the OSPF routing table is showing static routes even without mentioning "redistribute static" i tried to
increase the administative distance of static route but with no luck
i need the OSPF routing table not to show those static route
please help
tks
12-24-2003 01:41 AM
Can you please post the static route and your entries under router ospf.
12-24-2003 01:41 AM
Can you copy-paste sh run and sh ip route.
12-24-2003 07:30 AM
you are mostlikely missing the metrics
try this
redistribute static metric x metric type 1 subnets
the metric X is what ever you wish the metric to be , metric-type 1 indicates that all the costs along the way will added to the metric . subnets will apply vlsm.
12-24-2003 07:38 AM
Do these static routes point to an interface, instead of to an address? If so, the routes are considered to be connected, not static, and will be advertised by OSPF if there is a network statement covering the destination.
HTH
Mark
12-24-2003 07:53 AM
I did not read your problem correctly . I agree with Mark , This is most likely the problem
12-26-2003 07:37 AM
A B
Main(cloude) <======> (s0/0) RT-1 (s0/3)<=======> (s0/0)RT-2
when the connection A is down the dial up of RT-1 work coz no Link to X.X.1.0 255.255.255.0 (no problem)
"now I need RT-2 to Dial up when connection A is down" , the dial up in RT-2 don't work because it see the route X.X.1.0 255.255.255.0 in OSPF route table
from rt-1 asyn int and consider the line up
how can i make RT-2 Dial up ?(i need RT-2 to connect to the cloude)
RT-1
=====
!
aaa new-model
!
!
aaa authentication login access group tacacs+ enable
aaa authentication enable default group tacacs+ enable
aaa session-id common
ip subnet-zero !
!
no ip domain lookup
!
ipx routing 00e0.b064.48b0
!
chat-script test "atdt790243"
chat-script name:verdundl word:qwert ">" "ppp default"
chat-script logrouter "" name: verdundl\r word:
qwert\r ">" "ppp default\r"
chat-script buprouter "" "ATDP 92,790242" TIMEOUT 60 "CONNECT"
chat-script multitech-mt1932zdx-v32 "" "ATZ"
chat-script bdialing TIMEOUT 35 "OK"
chat-script script dd2 "at" "ok" "l5"
chat-script verdundd "" "atdt 790242" TIMEOUT 60 "CONNECT"
chat-script ppplogin "" \r name: verdundl word: qwert
> "ppp negotiate"
chat-script tdialing "" "atdt790480" TIMEOUT 60 "CONNECT"
chat-script tdialing2 "" "atdt366560" TIMEOUT 60 "CONNECT"
!
!
!
interface Loopback0
ip address 71.71.71.71 255.255.255.0
!
interface FastEthernet0/0
ip address X.X.3.1 255.255.255.0
duplex auto
speed auto
no mop enabled
!
interface Serial0/0
description link to AB
ip address X..24.193.2 255.255.255.0
encapsulation ppp
no fair-queue
ppp authentication chap
!
interface FastEthernet0/1
ip address X..24.71.219 255.255.255.0
duplex auto
speed auto
ipx network 6271
!
interface Serial0/1
description LINK TO MAIN
bandwidth 64
ip address X.X.182.2 255.255.255.0
ip helper-address X.X.1.2
encapsulation ppp
ip ospf authentication-key 7
ipx network 62182
no keepalive
ignore-dcd
!
interface Serial0/2
no ip address
shutdown
!
interface Serial0/3
description link to rt-2
ip address x.23.22.1 255.255.255.0
encapsulation ppp
ipx network 2322
no fair-queue
ppp authentication chap
!
interface Async65
ip address X.24.6.71 255.255.255.0
encapsulation ppp
dialer in-band
dialer idle-timeout 30
dialer string 366560
dialer watch-group 1
dialer-group 1
async default routing
async mode interactive
no peer neighbor-route
no peer default ip address
keepalive 500
pulse-time 1
ppp authentication chap
!
router ospf 1
log-adjacency-changes
network X.X.0.0 0.0.255.255 area 1
network X.23.0.0 0.0.255.255 area 1
network X.24.0.0 0.0.255.255 area 1
!
ip http server
no ip classless
ip route X.X.1.0 255.255.255.0 Async65 150
ip route X.X.7.0 255.255.255.0 Async65 150
ip route X.X.121.0 255.255.255.0 Async65 150
ip route X.X.199.0 255.255.255.0 Async65 150
ip route 192.168.100.0 255.255.255.0 X.X.7.220 150
ip tacacs source-interface FastEthernet0/1
!
!
!
logging X.X.1.59
logging X.X.1.177
access-list 111 deny ospf any any
access-list 111 deny ip host X.24.6.71 any
access-list 111 permit ip any any
access-list 171 permit icmp host X.X.71.1 host X.X.1.2 access-list 171 permit udp host X.X.71.1 host X.X.1.2 access-list 1000 deny FFFFFFFF 0
dialer watch-list 1 ip X.X.1.0 255.255.255.0
dialer watch-list 1 delay connect 5
dialer-list 1 protocol ip list 111
!
!
!
tacacs-server host X.X.1.41
tacacs-server directed-request
tacacs-server key axaxaxax
line con 0
login authentication access
line aux 0
script dialer tdialing2
login authentication access
modem InOut
autohangup
stopbits 1
flowcontrol hardware
line vty 0 4
login authentication access
!
ntp clock-period 17179873
ntp server X.X.1.217
ntp server X.X.1.219
RT-2
====
!
aaa new-model
!
!
aaa authentication login access group tacacs+ enable
aaa authentication enable default group tacacs+ enable
aaa session-id common ip subnet-zero
!
!
no ip domain lookup
!
no ip bootp server
ipx routing 000c.31ea.be40
!
chat-script script dd2 "at" "ok" "l5"
chat-script verdun" "atdt 790242" TIMEOUT 60 "CONNECT"
chat-script ppplogin "" \r name: verdundl word: qwert
> "ppp negotiate"
chat-script test "atdt790243"
chat-script name:verdundl word:qwert ">" "ppp default"
chat-script logrouter "" name: verdundl\r word:
qwert\r ">" "ppp default\r"
chat-script buprouter "" "ATDP 92,790242" TIMEOUT 60 "CONNECT"
chat-script tdialing "" "atdt790242" TIMEOUT 60 "CONNECT"
chat-script tdialing2 "" "atdt366560" TIMEOUT 60 "CONNECT"
!
!
!
interface Loopback0
ip address X.25.22.219 255.255.255.0
!
interface FastEthernet0/0
ip address X.24.22.219 255.255.255.0
no ip route-cache
no ip mroute-cache
duplex auto
speed auto
!
interface Serial0/0
description link RT-1
ip address X.23.22.2 255.255.255.0
encapsulation ppp
no ip route-cache
no ip mroute-cache
ipx network 2322
no fair-queue
ppp authentication chap
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1
no ip address
shutdown
!
interface Async65
ip address X.24.6.22 255.255.255.0
encapsulation ppp
dialer in-band
dialer idle-timeout 30
dialer string 366560
dialer watch-group 1
dialer-group 1
async default routing
async mode interactive
no peer default ip address
keepalive 500
pulse-time 1
!
router ospf 1
no log-adjacency-changes
network X.X.0.0 0.0.255.255 area 1
network X.23.0.0 0.0.255.255 area 1
network X.24.0.0 0.0.255.255 area 1
!
no ip http server
no ip classless
ip route X.X.1.0 255.255.255.0 Async65 150
ip route X.X.7.0 255.255.255.0 Async65 150
ip route X.X.121.0 255.255.255.0 Async65 150
ip route X.X.199.0 255.255.255.0 Async65 150
ip route X.24.1.0 255.255.255.0 Async65 150
ip route 192.168.100.0 255.255.255.0 X.X.7.220
ip tacacs source-interface FastEthernet0/0 !
!
!
logging X.X.1.177
access-list 111 deny ospf any any
access-list 111 deny ip host X.24.6.22 any
access-list 111 deny ip host X.X.1.177 any
access-list 111 permit ip any any
dialer watch-list 1 ip X.X.1.0 255.255.255.0 dialer watch-list 1 delay connect 5 dialer-list 1 protocol ip list 111 !
!
!
tacacs-server host X.X.1.41
tacacs-server directed-request
tacacs-server key axaxaxax
line con 0
login authentication access
line aux 0
script dialer tdialing2
login authentication access
modem InOut
transport input all
autohangup
stopbits 1
flowcontrol hardware
line vty 0 4
login authentication access
!
12-26-2003 09:06 AM
Like Mark stated above on rtr 1 try redefine your static routes from
ip route X.X.1.0 255.255.255.0 Async65 150
ip route X.X.7.0 255.255.255.0 Async65 150
ip route X.X.121.0 255.255.255.0 Async65 150
ip route X.X.199.0 255.255.255.0 Async65 150
to
ip route X.X.1.0 255.255.255.0 next hop ip address 150
ip route X.X.7.0 255.255.255.0 next hop ip address 150
ip route X.X.121.0 255.255.255.0 next hop ip addrress 150
ip route X.X.199.0 255.255.255.0 nex hop ip address 150
When you define static routes that point out an interface and that interface is defined by a network statement the router thinks that all the subnets that are in the static routes are connected to that interface hence advertises them in the routing process.
12-29-2003 12:24 AM
Hello,
I notice that X.X.1.0 does not have a network statement on RT-1. Therefore, when the RT-1 async comes up, I assume you are running OSPF on the async, and X.X.1.0 is learned over this. Is this correct?
If so, I would remove OSPF from the asyncs on RT-1 and RT-2 and run RIP or EIGRP on the async on RT-1 and RT-2, but filter the X.X.1.0 in RIP/EIGRP between RT-1 and RT-2 (or even better don't run the RIP/EIGRP it between them at all)
This should stop the X.X.1.0 learned by OSPF over the RT-1 async being sent to RT-2,
Regards
Ian
12-29-2003 06:46 AM
The statement "network x.x.0.0 0.0.255.255 area 1" does cover x.x.1.0.
Mark
12-30-2003 04:32 AM
tks all for contribution
i think i will try EIGRP , i will go with ipotts
i will let u know
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide