Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Other status

My Catalyst with 2 supervisors give this message:

Catalyst6506> (enable) 2002 Jan 08 08:47:45 %SYS-5-MOD_OK:Module 15 is online

2002 Jan 08 08:47:47 %SYS-5-MOD_NOSCPPINGRESPONSE:Module 16 not responding... re

setting module

2002 Jan 08 08:47:47 %SYS-5-MOD_RESET:Module 16 reset from Software

And then when I type show module, it display this:

Catalyst6506> (enable) show module

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes standby

15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok

2 2 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok

16 2 1 Multilayer Switch Feature WS-F6K-MSFC2 no other

3 3 16 1000BaseX Ethernet WS-X6416-GBIC no ok

4 4 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok

I would like upgrade with 12.1.8b.E7 but I found the boot but not the IOS image.

Can anybody tell me the names of the versions that I have to put in.

Thanks a lot

2 REPLIES
New Member

Re: Other status

It the status is "other", it means the switch can recognize the module. But can't init it. I also have such experience.

Most likely, you should open a TAC case in cisco and let TAC engineer handle it. In my case, it is RMA.

New Member

Re: Other status

MSFC needs two images. Boot image is the "helper" image but you need to download regular image like

c6msfc2-jsv-mz

and change the boot variable to load the image

boot system flash bootflash:

boot bootldr bootflash:

118
Views
0
Helpful
2
Replies