I'm searching for possible cause of output drops on a fiber link between my distribution(6509 v12.2.18.SXE2) and my wiring closet aggregation switch(4912G v126.96.36.199)
Input queue: 0/2000/420/0 (size/max/drops/flushes); Total output drops: 422596
This link is part of a channel, the other fiber interface as packet drops also. There is no packet drops on the 4912G. There was no spaning tree problem(no topology change) since last clear of the counter.
This problem is observed on all link to old 4912G, no problem on link to 3750G-12SFP. Is it a lack of forwarding power from the 4912G ?
Lack of forwarding power from the 4912G can also be a reason for this output drop.But, we can't say it is the only reason.Check for the physical fibre link connectivity b/w 6509 and 912G.Any loose connection may also result in drop.Do this packet drop occurs always or during peak hours alone?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.