Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Output Interpreter don´t work

Hi,

one of my switches has arbitrarily booted and has wrote a crashdump, but the Cisco Output interpreter can´t analyse the dump. Has anyone an idea ??

=======================================================

CATALYST STACK DECODE NOTIFICATIONS (if any)

=======================================================

Error : Could not find any crash information. Missing/Invalid 'show log' ?

The stack trace decoded symbols are:

No specific function names

#########################################################

sh module

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 0 Switching Supervisor WS-X2948 no ok

2 1 50 10/100/1000 Ethernet WS-C2948G no ok

Mod Module-Name Serial-Num

--- -------------------- --------------------

1 JAE0525009X

2 JAE0525009X

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-06-52-2d-e8-00 to 00-06-52-2d-eb-ff 2.4 5.4(1) 6.3(6)

2 00-06-52-2d-eb-9e to 00-06-52-2d-eb-fd 2.4

sh crashdump 1

Version and date:

GSP: 6.3(6.0) NMP: 6.3(6) YMD 03/07/10 time 10:55

Register contents:

meteor reset cause 0x000000c2

epc 0xffffffff8001672c sp 0xffffffff80063c90

ra 0xffffffff8001672c at 0xffffffff80050000

v0 0x000000000000003c v1 0xffffffff800338a0

hi 0x000000000081da40 lo 0x0000000000000018

a0 0x0000000000000000 a1 0xffffffffbe801800

a2 0x00000000000a0000 a3 0x0000000000000008

sr 0xffffffffb400ec22 badva 0x0000000030278900

cause 0x0000000000000424 gp 0xffffffff8004d150

t0 0xffffffff80015c88 t1 0xffffffffffffffe5

t2 0x0000000000000001 t3 0x0000000040999914

t4 0x0000000000000001 t5 0x00000000000000a1

t6 0x0000000000000000 t7 0x0000000000001dff

t8 0x0000000040a3fc52 t9 0x0000000040b95864

s0 0x0000000000000000 s1 0x0000000000000400

s2 0xffffffff8005e208 s3 0xffffffff80062d58

s4 0x0000000000000000 s5 0x0000000000000000

s6 0x0000000040999894 s7 0x0000000000000000

s8 0x0000000041321068

feir 0x0000000000000000 fcsr 0x0000000001001004

f0 0x405aac599999999a f1 0x0000000000000000

f2 0x000000000000006a f3 0x7472000000000000

f4 0x52455456414c2069 f5 0x73206e6f74206f66

f6 0x207479706520536c f7 0x6565706572507472

f8 0x0000000000000000 f9 0x55736167653a204d

f10 0x64696f4d61737465 f11 0x725074723a3a6d64

f12 0x696f446576696365 f13 0x28544849532c2041

f14 0x5454524942555445 f15 0x2900000000000000

f16 0x75736167653a204d f17 0x64696f4d61737465

f18 0x723a3a6d64696f44 f19 0x6576696365285448

f20 0x49532c205b76616c f21 0x75655d2029000000

f22 0x52455456414c2069 f23 0x73206e6f74206f66

f24 0x2074797065204d64 f25 0x696f446576696365

f26 0x507472206f722061 f27 0x206e756c6c207661

f28 0x6c75650000000000 f29 0x4d64696f44657669

f30 0x6365507472000000 f31 0x52455456414c2069

Exception Handlers Executing: 0

Thread flags: 0x0000000000000049

Stack contents:

Popped part:

0xffffffff 0x80036228 0x00000000 0x00000000

0xffffffff 0x8001ccf8 0xffffffff 0x800682f4

0x00000000 0x0000000a 0x00000000 0x00000400

0xffffffff 0x80036600 0x00000000 0x80092aa0

0xffffffff 0x80067fb0 0xffffffff 0x800923c0

0xffffffff 0x80062d58 0xffffffff 0x80035c08

0xffffffff 0x80062d58 0xffffffff 0x80062d58

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0xffffffff 0x80035d28

0x00000000 0x41320db8 0xffffffff 0x80019fa4

0x00000000 0x00000000 0x00000004 0x00000000

0x1e2de000 0x80092400 0xffffffff 0x8005e230

0x00000000 0x00000000 0x00000000 0x00000400

0xffffffff 0x8005e208 0xffffffff 0x80062d58

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x40999894 0xffffffff 0x8001672c

Pushed part:

0xffffffff 0x80039990 0x00000000 0x00000004

0x00000000 0x00000000 0x00000000 0x00000008

0x00000000 0x00000004 0x00000000 0x00000004

0xffffffff 0x80016624 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00008000 0xffffffff 0x80016394

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x40a18100 0x00000000 0x00000010

0x00000000 0x413210d0 0x00000000 0x41321008

0xffffffff 0x80015ca4 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0xffffffff 0x800228f8

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

0x00000000 0x00000000 0x00000000 0x00000000

Saved checksum: 0xe32f06fa Computed checksum: 0xe32f06fa

#########################################################

Thanks for your help

Larry

2 REPLIES
Cisco Employee

Re: Output Interpreter don´t work

I tried to decode with our internal tools and it appears that the crashinfo is invalid. Can you paste the output of "sh nvramenv 1". Also, go ahead and clear this crashinfo using "clear crashdump 1"

New Member

Re: Output Interpreter don´t work

Two month ago we have upgraded the switches from CatOS 5.5.5 to 6.3.6.

Could it be, that the switch couldn´t overwrite an old CatOS 5.5.5 dump ??

############################################################

sh nvramenv 1

PS1="rommon ! > "

?="0"

DiagBootMode="post"

MemorySize="64"

ResetCause="198"

AutobootStatus="success"

###########################################################

204
Views
0
Helpful
2
Replies
CreatePlease to create content