Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Over utilization with Novel IP

As our server group converts Novel servers from IPX to IP the 3640 routers in those locations experience a jump in utilization from an average of 8% to over 80% during the day and never going below 30% at night with very little activity on any interface.

Any suggestions.

2 REPLIES

Re: Over utilization with Novel IP

In case you haven't seen this link: http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_tech_note09186a00800a70f2.shtml

Do a show proc cpu | exc 0.00, what is causing the high cpu? Post the output if you want. What is the memory like, is there a memory leak (ie a process not releasing the mem)?

Steve

New Member

Re: Over utilization with Novel IP

Do you have two 3640's routing between the same two ethernet segments? If so, make sure only one of the routers has IPX type-20 propagation enabled, otherwise these packets may become a broadcast storm.

100
Views
0
Helpful
2
Replies
CreatePlease to create content