Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Override DHCP for DDR

I am attempting to enable a Cisco 1710 to do Backup DDR to a Cisco AS5200 that is also being used to provide 56K analog connectivity to remote users. The problem is that upon establishing a connection, the AS5200 assigns the line an ip address from it's dhcp pool as opposed to assigning it the static ip address it requests. Is there something I need to enable on the interface or line to make this possible?

Cisco Employee

Re: Override DHCP for DDR

You can use the dialer-map command under the "interface group-async x" to assign static ip address to 1720 all the time..So lets say 1720 will present itself with username "cisco1720" during dialin to AS5200 and you want to allocate static ip of you just need to add following command under group-async x interface

dialer map ip name cisco1720

With that you do need "ip address negotiated" under the interface on 1720 which is dialing out.

Rest of the 56K users on AS5200 will get the ip address from dhcp with the existing config.

New Member

Re: Override DHCP for DDR

Thanks for your help actually I had done this and placed the dialer map under a dialer interface. The problem was that I hadn't associated the dialer interface and the asyncronous interface to the same dialer group. Rookie mistake I know. Anyway it's solved sorry to waste anyones time in posting this.