11-11-2003 09:42 AM - edited 03-02-2019 11:38 AM
We have 4 stackable Cat-2980G switches that uplink (Etherchannel) and downlink (Etherchannel)to a pair of Cat-6506's. The Cat-6506's have MSFC's. The error message in the syslog on the first Cat-2980G switch says the following:" P2_WARN: 1/Host 00:07:b3:48:cf:fc is flapping between ports 3/22 and port 3/33". The port 3/33 is an uplink port to one of the Cat-6506's. When I did "sh cam dynamic" on both ports, the 3/22 port did not have that MAC address on it, however the 3/33 did. So, I traced it down to the MSFC port (15/1)on the Cat-6506 switch. This is the right path for traffic to take for switching VLAN's. What I can't figure out is why is the error message saying that the that MAC address was learned from the 3/22 port, when it was really learned from port 3/33. Can anybody please help?
thanks.
11-11-2003 12:34 PM
You might be having STP issues. The following page should help
11-11-2003 01:05 PM
I have also seen these type issues when the switch is flaking out . Sometimes a reload will help , other times we have seen where it is a supervisor going south .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide