Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

%PA-2-UNDEFIO: message on cisco uBR7246VXR (NPE400)

In this moment i have a cisco uBR7246VXR (NPE400) with version 12.2(11)BC2. When the Ubr is booting up shows the following messages:

System Bootstrap, Version 12.2(4r)B2, RELEASE SOFTWARE (fc2)

TAC Support: http://www.cisco.com/tac

Copyright (c) 2002 by cisco Systems, Inc.

C7200 platform with 524288 Kbytes of main memory

Self decompressing the image : ################################# [OK]

%PA-2-UNDEFIO: Unsupported I/O Controller (type 533) in I/O Bay. The I/O Controller network interfaces will be unavailable.

%LINK-4-NOMAC: A random default MAC address of 0000.0c9a.1ca2 has been chosen. Ensure that this address is unique, or specify MAC addresses for commands (such as 'novell routing') that allow the use of this address as a default.

Afterward the Ubr load the IOS and the message doesn´t appear again.

Why do these messages appear ?

Is there any failure ?

I tested with another IOS 12.2(15)BC1 and happen the same.

regards.

3 REPLIES
Silver

Re: %PA-2-UNDEFIO: message on cisco uBR7246VXR (NPE400)

It looks like you have a card that the software does not support. What modules do you have in this box?

Steve

New Member

Re: %PA-2-UNDEFIO: message on cisco uBR7246VXR (NPE400)

The Ubr has:

the NPE-400 and a UBR7200-I/O-2FE/E.

regards

New Member

Re: %PA-2-UNDEFIO: message on cisco uBR7246VXR (NPE400)

Hi,

I tested changing the boot version, because was loading the ubr7200-boot-mz.122-11.CX.

I tested with the ubr7200-boot-mz.122-11.BC3d.bin, but shown the same messages.

Afterward,I tested with the ubr7200-boot-mz.122-15.BC1a.bin and the messages didn´t appear.

Mar 23 09:55:58.363: %SYS-5-RELOAD: Reload requested by console.

System Bootstrap, Version 12.2(4r)B2, RELEASE SOFTWARE (fc2)

TAC Support: http://www.cisco.com/tac

Copyright (c) 2002 by cisco Systems, Inc.

C7200 platform with 524288 Kbytes of main memory

Self decompressing the image : ############################### [OK]

Self decompressing the image : ########################################################################################################################################## [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

Maybe there is a problem with this boot release.

regards.

423
Views
0
Helpful
3
Replies