Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PA-GE and PA-POS-OC3 on a 7206 Router w NPE200

I would need to activate a 155Mbps link on a 7206 router:

cisco 7206 (NPE200) processor with 122880K/8192K bytes of memory

It is possible to insert a PA-POS-OC3 board on such a router model ?

And there is a GigaEth Port Adapter for 7206 ?

It seems that the PA-GE is not supported on 7206 NPE-200 models.

Thank you.

Alessandro Asson

1 REPLY

Re: PA-GE and PA-POS-OC3 on a 7206 Router w NPE200

Yep, PA-GE is supported only on 7200s with NPE 300 and later.

YOu can install PA-POS-OC3 module on a 7200 with NPE 200

Are you using a 7200 VXR ? For VXRs you need a min of 12.0(3) IOS, for supporting PA-POS-OC3 module. Your ram indicates you have a NPE 200 with 128 MB of RAM. .

Do you have 16MB FLASH ? Most of the 12.x images might need 16Mb flash.

207
Views
0
Helpful
1
Replies