Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

PA-T3+ and 7120-T3

I need to add a second T3 interface to my 7120-T3. Can I install the PA-T3+ in my 7120-T3? and if so what minimum IOS would I need?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: PA-T3+ and 7120-T3

The PA-T3+ is indeed supported on the 7120 and requires a minimum of 12.1(9)E, 12.2(7)T or 12.3(1).

You can use the HW/SW compatibility matrix available on CCO to find that kind of information:

http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
2 REPLIES
Cisco Employee

Re: PA-T3+ and 7120-T3

The PA-T3+ is indeed supported on the 7120 and requires a minimum of 12.1(9)E, 12.2(7)T or 12.3(1).

You can use the HW/SW compatibility matrix available on CCO to find that kind of information:

http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
New Member

Re: PA-T3+ and 7120-T3

Thanks, I knew there was a link for this info but couldn't remeber what it was. I now have it bookmarked.

94
Views
0
Helpful
2
Replies
CreatePlease to create content