Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

noc
New Member

Packet Drops

My 7507 router is connected to my provider's router through 4 E1 ports(PA-MC-8E1 port adaptor) using 4 -wire direct cable having length equal to 220 meters. Packet drop is observed on providers router even at 50% of the link utilization. I also observe the drops when i run ping test on the interface. The larger sized packets are completely rejected by the interfaces. There are no CRC errors observed and the cable thickness is .6 mm. Physical media seems ok what would be the problem.

Please respond ASAP.

2 REPLIES
New Member

Re: Packet Drops

Sounds like configuration.

Could you test if distributed Cef is enabled?

command is show ip interface

and look for this line

IP Distributed switching is enabled

noc
New Member

Re: Packet Drops

Distributed switching is disabled.

102
Views
0
Helpful
2
Replies
CreatePlease login to create content