cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
563
Views
0
Helpful
2
Replies

parity error

spremkumar
Level 9
Level 9

hi

i m getting the below mentioned error and my router goes in loop like rebootin continously.not coming to prompt none of the prompt.

%ERR-1-GT64120 (PCI-1): Fatal error, Parity error on master read

GT=0xB4000000, cause=0x00100000, mask=0x00D01D00, real_cause=0x00100000

bus_err_high=0x00000000, bus_err_low=0x31000000, addr_decode_err=0x00000470

r0 = FFFFFFFF r1 = FFFFFFFF r2 = 0 r3 = 61460000 r4 = 0

r5 = 60E036FC r6 = 0 r7 = 60E0370B r8 = 0 r9 = 61922AF4

r10 = 0 r11 = 0 r12 = 0 r13 = 40000000 r14 = FFFFFFFF

r15 = FFFFFFF8 r16 = 0 r17 = 0 r18 = 0 r19 = 619242A4

r20 = 0 r21 = 7 r22 = 0 r23 = 3E000000 r24 = 0

r25 = 61922A78 r26 = 0 r27 = 616AE6F0 r28 = 0 r29 = 61737528

r30 = 0 r31 = 61737524 r32 = FFFFFFFF r33 = FFFFFFFF r34 = FFFFFFFF

r35 = FFFFFFFF r36 = FFFFFFFF r37 = FFFFFFFF r38 = FFFFFFFF r39 = FFFFFFFF

r40 = FFFFFFFF r41 = FFFFFFFF r42 = FFFFFFFF r43 = FFFFFFFF r44 = FFFFFFFF

r45 = FFFFFFFF r46 = FFFFFFFF r47 = FFFFFFFF r48 = 0 r49 = 61737568

r50 = 0 r51 = 0 r52 = 0 r53 = 3041F001 r54 = 0

r55 = 100000 r56 = FFFFFFFF r57 = FFFFFFFF r58 = 0 r59 = 61A73258

r60 = FFFFFFFF r61 = FFFFFFFF r62 = 0 r63 = 6019CFC4

sreg = 3401E103 mdlo_hi = 0 mdlo = 1B207

mdhi_hi = 0 mdhi = 1 badvaddr_hi = FFFFFFFF

badvaddr = FFFFFFFF cause = FFFFFFFF epc_hi = 0

epc = 601A3320 err_epc_hi = FFFFFFFF err_epc = FFFFFFFF

%ERR-1-FATAL: Fatal error interrupt, reloading

err_stat=0x0

=== Flushing messages (01:31:32 UTC Mon Mar 1 1993) ===

Queued messages:

Unexpected exception, CPU signal 22, PC = 0x0

-Traceback= 0 0

$0 : 00000000, AT : 00000000, v0 : 00000000, v1 : 00000000

a0 : 00000000, a1 : 00000000, a2 : 00000000, a3 : 00000000

t0 : 00000000, t1 : 00000000, t2 : 00000000, t3 : 00000000

t4 : 00000000, t5 : 00000000, t6 : 00000000, t7 : 00000000

s0 : 00000000, s1 : 00000000, s2 : 00000000, s3 : 00000000

s4 : 00000000, s5 : 00000000, s6 : 00000000, s7 : 00000000

t8 : 00000000, t9 : 00000000, k0 : 00000000, k1 : 00000000

gp : 00000000, sp : 00000000, s8 : 00000000, ra : 00000000

EPC : 00000000, ErrorEPC : 00000000, SREG : 00000000

MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000

Cause 00000000 (Code 0x0): Interrupt exception

No fault history 0xFFFFFFFF. Need 11.1 (2) or higher ROM

Free space check for flash:crashinfo_19930301-013132 failed (-1/32768)

Free space check for slot0:crashinfo_19930301-013132 failed (-1/32768)

Free space check for slot1:crashinfo_19930301-013132 failed (-1/32768)

*** System received a System Error ***

signal= 0x16, code= 0x0, context= 0x618d16d0

PC = 0x6052eeec, Cause = 0x20, Status Reg = 0x34018002

C3660 processor with 196608 Kbytes of main memory

Main memory is configured to 64 bit mode with parity disabled

regds

prem

2 Replies 2

Hello,

this could be a memory hardware error, can you try to reseat the DRAM and Flash first (and if that doesn´t help replace it) and see if the error disappears ?

Regards,

Georg

beng
Level 1
Level 1

If this is a new install, definitily get the chassis and memory replaced first.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: