last week i am unable to connect to 6509 switch over telnet,then we restarted the switch.it's was ok.when we checked show spanning-tree command,one of the port 5/7 is blocking,so what i should do now?pls help us
While you were not able to telnet, were you able to console in? Did you notice anything out of the ordinary? Depending on how your STP topology, it's normal to have blocking ports. What connects to port 5/7? Is it another switch?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...