one of our isdn customer has done some R&D with his router by changing the authentication on both console and vtys.eariler ther was a passwd set but he changed the login to local without setting any username or passwd.is ther any way out to break this out ????its 803series router.
The procedure shows you how to reset the enable secret, but the important part of the procedure is that, at the point you can set the enable secret, you are in enable mode and have temporarily bypassed your broken AAA configuration. While you have enable access to the router, use that opportunity to remove or repair your broken AAA configuration, or add local users for authentication, or whatever you need to do.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...