I just recently set up Policy Based routing to redirect my internet traffic across a DS3 and out a PIX515. I made this change which uses Access-lists based on a host deny to my local subnet and permit to any, then follow route map to the next hop. Slowness started in the ProE and PROman applications on the remote side of the DS3. I do not see an CPU hit and traffic is max 8 percent on the line. I also added the route cache policy to try and help but to no avail. Anyone else have this problem? Anyone have slowness after PBR?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...