Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Pc card on sup error

Hi Expert!

when i have insert the pc card inside the sup 1 and i issue the command dir slot0:;i have received the following error:error = -24

Open device slot0 failed (bad device info block).the pc card didn't contain a key protection.

10xs

Ali

3 REPLIES

Re: Pc card on sup error

try formatting the PCMCIA card. It does not look like it's in the right format.

format slot0:

Rate helpful posts.

New Member

Re: Pc card on sup error

hi

ok;what they mean by enter volume id when i issue format slot0:what can i write in this field

10xs

Ali

Re: Pc card on sup error

Just press enter, nothing is really needed to put in volume id, it like naming a hard drive.

95
Views
3
Helpful
3
Replies