64KB packets are the standard for pps ratings since Marketing folks love "best case" scenarios. My experience with a 2621 was that the total throughput achievable per the pps rating (70K pps * 64 bytes = ~4.3Mbps for a 2621) reflected reality with full-sized packets as well (with which I was able to push around 5Mbps). Can't say if this is the case for other routers as well, but there isn't much to go on in this regard as it's not often I run across bandwidth numbers for pure routers.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...