Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

Performance of WS-C3560G-24 vs. WS-C3560G-48

We're in the process of replacing legacy switches in our wiring closets with a bunch of 3560 switches. The switches were already ordered several months ago by the previous manager. He ordered a mix of WS-C3560G-24PS-S and WS-C3560G-48TS-S models.

He also left a design, which called for using the WS-C3560G-24PS-S at the distribution layer and the WS-C3560G-48TS-S at the access layer (yes, no provisions for PoE at the access layer which I found to be silly, but that's another thing)

My question is, will this be a bottleneck? Will the C3560G-24 have a lower throughput as opposed to the 48 port model?

1 REPLY
Bronze

Re: Performance of WS-C3560G-24 vs. WS-C3560G-48

Figured it out. Both have the same forwarding rate, so there shouldn't be a bottleneck in this design.

http://www.cisco.com/en/US/products/hw/switches/ps5528/prod_models_comparison.html

151
Views
0
Helpful
1
Replies