Internet -- Firewall (10.0.0.253) -- (Vlan 1, 10.0.0.254)some servers (10.0.0.1 and 10.0.0.2) --
(Vlan 2 10.0.1.254) some servers (10.0.1.1 and 10.0.1.2)
(Vlan 3 10.0.2.254) some servers (10.0.2.1 and 10.0.2.2)
Old network (Vlan 4 192.168.168.210)
Catalyst ip route 0.0.0.0 0.0.0.0 10.0.0.253
When I try to ping from the firewall to 10.0.0.1 it works. When I try to ping from 10.0.0.1 to the firewall it won't work. When I try to ping from 10.0.1.1 to the firewall it works, but when I try to ping to 10.0.0.1 it fails.
I have de default gateway set as follows:
Firewall(10.0.0.253) Default Gateway: 10.0.0.254
Server (10.0.1.1) Default Gateway: 10.0.1.254
Al the other servers and pc's in the other Vlan's have there subnet set to the Vlan ip number.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...