cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
454
Views
0
Helpful
1
Replies

Ping work, Telnet fail, and No consol access

philp
Level 1
Level 1

Hi,

I have a problem with my Cisco 1401 router (ADSL connection).

Sometimes i can't access to Internet, and the only solution is to switch off and switch on the router.

Then the Internet connection is again operational.

Here is my diagnostics :

When the problem occur.

1 )I ping the router Ethernet card : No problem

2) I try to establish a telnet session : Access denied.

3) I try to connect a PC on the console port : I've this message

%% Low on memory; try again later

6d00h: %SYS-2-MALLOCFAIL: Memory allocation of 260 bytes failed from 0x2550016,

pool Processor, alignment 0

-Process= "IP Input", ipl= 0, pid= 25

-Traceback= 21FBDC6 21FD0A4 255001E 255034C 25507FC 2549292 22FC2D6 22FB848 22FB

9A2 22FBAC6

When i start the router again, there is no problem for several days and then there is again the problem.

Does anyone have the same problem ?

Nb:

I have already had the same problem with another Cisco router 801 (And ISDN Internet connection)

Thanks for your help.

1 Reply 1

MickPhelps
Level 1
Level 1

sounds like you have a memory leak.

Do a bug check on your version of IOS or call TAC.

Mick.