Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Please Help with Problem of Qos class-based shaping

Good day !!!

I have such problem, i want to distribute traffic between different users on my network, the scenario is like this ...

lets say i have 2 users USER1 & USER2, USER1 has bandwidth 64 & USER2 has bandwidth 64, i want to take them in one group and when USER1 is not working USER2 can be able to take bandwidth of USER1 and on the contrari, but when both users are working they must take there CIR 64, here is my config that dont work maybe Good People will help me and correct my errors ?????

class-map match-any acl_1

match access-group 1

class-map match-any acl_2

match access-group 2

class-map match-any all_acl

match access-group 1

match access-group 2

policy-map bandwidth

class acl_1

bandsidth 64

class acl_2

bandwidth 64

policy-map shape

class all_acl

shape average 140000

service-policy bandwidth

interface ethernet 0/0.10

ip cef


service-out shape

This config works but, problem is that the pings are high more than

1500 >, and when one user downloads one file and at the same time begins to doenload the second the speed for second download is too low, and third download dosn`t begins at all. To say in one work it is not STABIL... PLEASE HELP IF CAN !!!

New Member

Re: Please Help with Problem of Qos class-based shaping

I guess this is very common, I mean this is nota specific problem

New Member

Re: Please Help with Problem of Qos class-based shaping

So you want to say that it couldn`t be done on cisco router ???