Re: Pls Hlp - Designing a LAN with WAN Access/ Security/ and Voi
A 3700 series router would work wonders here. It is fast enough. It can handle VoIP (multiple ports available). It can have firewall on it along with VPN (enough horsepower) and finally it can do IDS (limited to 50 strings). The IOS that would handle all this would be "IP/FW/IDS PLUS IPSEC 3DES".
It has a multiple-interface FastEthernet NetworkModule (NM-2FE-2W) so you can have 4 FastEthernet Interfaces.
So get the following
IOS - IP/FW/IDS PLUS IPSEC 3DES
VoicePorts that you need (You are not clear on the ports)
Just a suggestion, try to implement VLANs as you have 400 Machines (around 500 ip addresses including peripheral devices) growing to 700 Machines (around 800 ip addresses including peripheral devices). You will probably want 4 VLANs (to avoid broadcast traffic from overwhelming your devices) with two to three VLANs now and the fourth VLAN later on.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.