Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

PoE maximum output

What's the maximum power (Watt) that can be drawn from a single PoE port and a PoE+ port?

From my studies what I understand is around 15W for PoE (usable 12W) and 30W for PoE+ (usable 25.5W).

And for devices with power rating greater than this, PoE injectors are required.

Please share your knowledge.

TIA

Rishad

Everyone's tags (1)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Gold

What's the maximum power

What's the maximum power (Watt) that can be drawn from a single PoE port

15.4w for PoE, 30.0w for PoE+ and 60.0w uPoE.

VIP Purple

Hi

Hi

so poe capabilities depend on the hardware in place , it can vary switch to switch and diff types of blades etc but usually the max is around 30 wqtt per port , but as below if your using 30w then you may only have a certain allowed amount per switch as there is a total poe watt count you cant go over , if you have devices that say only use 7 watt you can also set it to use less power per port

if you want to know what your device is capable of you would check the public data sheets , as an example here is one for te 2960x models

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/data_sheet_c78-728232.html

Most pf them are close enough

Table 8.       2960-X PoE and PoE+ Power Capacity

Switch Model

Maximum Number of PoE+ (IEEE 802.3at) Ports*

Maximum Number of PoE (IEEE 802.3af) Ports*

Available PoE Power (Single PS Source)

Cisco Catalyst 2960X-48FPD-L

24 ports up to 30W

48 ports up to 15.4W

740W

Cisco Catalyst 2960X-48LPD-L

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960X-24PD-L

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960X-48FPS-L

24 ports up to 30W

48 ports up to 15.4W

740W

Cisco Catalyst 2960X-48LPS-L

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960X-24PS-L

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960X-24PSQ-L

3 ports up to 30W

7 ports up to 15.4W

110W

Cisco Catalyst 2960XR-48FPD-I

24 ports up to 30W

48 ports up to 15.4W

740W

Cisco Catalyst 2960XR-48LPD-I

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960XR-24PD-I

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960XR-48FPS-I

24 ports up to 30W

48 ports up to 15.4W

740W

5 REPLIES
Hall of Fame Super Gold

What's the maximum power

What's the maximum power (Watt) that can be drawn from a single PoE port

15.4w for PoE, 30.0w for PoE+ and 60.0w uPoE.

New Member

Thanks a lot. I didn't know

Thanks a lot. I didn't know about uPoE. Just found out that this is Cisco proprietary and can deliver upto 60W through a port. Also discovered that my Cisco Unmanaged 110  Series switch doesn't support uPoE. My understanding is only 3 series support it.

Thanks. I've learnt a lot.

VIP Purple

Hi

Hi

so poe capabilities depend on the hardware in place , it can vary switch to switch and diff types of blades etc but usually the max is around 30 wqtt per port , but as below if your using 30w then you may only have a certain allowed amount per switch as there is a total poe watt count you cant go over , if you have devices that say only use 7 watt you can also set it to use less power per port

if you want to know what your device is capable of you would check the public data sheets , as an example here is one for te 2960x models

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/data_sheet_c78-728232.html

Most pf them are close enough

Table 8.       2960-X PoE and PoE+ Power Capacity

Switch Model

Maximum Number of PoE+ (IEEE 802.3at) Ports*

Maximum Number of PoE (IEEE 802.3af) Ports*

Available PoE Power (Single PS Source)

Cisco Catalyst 2960X-48FPD-L

24 ports up to 30W

48 ports up to 15.4W

740W

Cisco Catalyst 2960X-48LPD-L

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960X-24PD-L

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960X-48FPS-L

24 ports up to 30W

48 ports up to 15.4W

740W

Cisco Catalyst 2960X-48LPS-L

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960X-24PS-L

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960X-24PSQ-L

3 ports up to 30W

7 ports up to 15.4W

110W

Cisco Catalyst 2960XR-48FPD-I

24 ports up to 30W

48 ports up to 15.4W

740W

Cisco Catalyst 2960XR-48LPD-I

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960XR-24PD-I

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960XR-48FPS-I

24 ports up to 30W

48 ports up to 15.4W

740W

New Member

THat is a very helpful post.

THat is a very helpful post. What about the WS-C2960X-48TS-L does that support power over ethernet?

I am not sure if  supports it or not , cause there is no command power inline auto under interface command

(config)#interface gi1/0/45
(config-if)#power inline auto
                                    ^
% Invalid input detected at '^' marker.

But still there are phones connected to it and I assume they getting power from the switch.

I have some phone issues like going offline and need to be sure if that is a power issue or not

Thank you,

Mery

Hall of Fame Super Gold

Thank you very much for

Thank you very much for taking the time to rate our posts.  :)

953
Views
5
Helpful
5
Replies
CreatePlease to create content