I'm having some difficulty forwarding port 80 traffic from the inside LAN of a clients NW to a public proxy type filtering server which resides within my corporate NW. It is not behind a firewall but is right off of our internet router (I know, "real secure"). In the past I used normal policy based mapping to do this at my old company, and can not find that I am missing anything going over my old configs. Any other direction??
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...