I am facing problem while routing the HTTP and FTP based LAN Traffic to high speed internet line connected to the Router interface. and the default interface is another low speed internet line. What is happening is , FTP Traffic despite being matched by access-lists is going to low speed line. Notice that I have kept default interface is low speed internet line.
If somebody can assist me in providing me the right configuration, I would be grateful. Thanks,
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...