Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

POLICY-MAP counters

I have configured policy-maps and class-maps on 3550 and 3560 switches.

The following is excerpt....

class-map match-any voip_class

match access-group 100

!

!

policy-map voip_policy

class voip_class

trust dscp

!

!

interface GigabitEthernet0/12

service-policy input voip_policy

priority-queue out

!

access-list 100 permit udp any any

I have the access-list 'open' for testing purposes.

However when I run the command 'sh policy-map int gi0/12' I get no counters increasing.

Should I?

Also if I run the 'sh access-list 100' command, should I get increasing counters?

Thanks for any help

Nik Mihelioudakis

  • Other Network Infrastructure Subjects
1 REPLY
Cisco Employee

Re: POLICY-MAP counters

Sh policy map is not supported on this platform

http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCdy50035

Use "show mls qos interface gig0/12 statistics" instead.

164
Views
4
Helpful
1
Replies
This widget could not be displayed.